- label News
In recent weeks, many manufacturing companies have been facing a new increase in energy and raw material costs. After years already marked by significant price rises, this additional growth is once again putting pressure on the profitability of many production plants.
In a context where energy, materials, and plant management increasingly affect operating costs, every process inefficiency becomes a critical factor. Even elements often considered secondary are returning to the center of attention for engineers and production managers.
In powder coating processes, one of these elements is the management of overspray, namely the portion of powder that does not adhere to the part during application and is extracted by the filtration system inside the powder coating booth.
Reducing overspray dispersion and improving powder coating overspray recovery not only prevents material waste, but also helps reduce the energy consumption of the entire extraction system.
To understand how to reduce energy consumption and powder waste in industrial powder coating systems, it is useful to analyze the main technical aspects that influence process efficiency. In this article we will look at:
- Dust extraction in powder coating booths
- Why does overspray in powder coating increase plant operating costs?
- What are the technical and economic advantages of overspray recovery?
- The importance of extraction system design
- What are the TAMA AERNOVA solutions for powder coating?
- How can process efficiency and industrial competitiveness be improved?
Dust extraction in powder coating booths
During the powder application phase, electrostatic spray guns generate a cloud of particles that must be properly managed by the powder coating dust collection system.
The coating booth cannot be completely closed because it must allow parts to pass along the conveyor line and enable possible manual intervention by the operator. It therefore becomes essential to maintain a controlled airflow that prevents powder from escaping through the openings of the booth.
A properly designed extraction system allows you to:
- ensure operator safety
- prevent dust dispersion in the working environment
- maintain stable operating conditions in the coating process
In addition, the presence of airborne dust can generate potentially explosive atmospheres. For this reason, the system must comply with specific safety conditions related to the MIE (Minimum Ignition Energy).
Why does overspray in powder coating increase plant operating costs?
When a significant portion of the sprayed powder does not adhere to the part, the plant must manage a larger quantity of particles to be extracted and filtered.
This leads to several negative effects:
- increased load on the filtration systems
- higher use of compressed air for filter cleaning
- increased system pressure losses
- greater energy consumption by the fans
In other words, overspray is not only a loss of material, but also a factor that directly increases the plant’s energy consumption.
What are the technical and economic advantages of overspray recovery?
To improve process efficiency, it is essential to recover the powder that does not deposit on the parts and reintroduce it into the coating cycle. Effective overspray recovery makes it possible to reduce material waste and improve the economic sustainability of the plant.
This result can be achieved by installing a cyclone separator for powder coating overspray recovery between the application booth and the cartridge filter.
The cyclone allows you to:
- separate powder from the extracted air
- reduce the load on the powder coating cartridge filter
- recover reusable powder for the process
Thanks to this operating principle, very high recovery rates can be achieved, resulting in significant savings in coating material.
The importance of extraction system design
To achieve truly efficient results, careful sizing and design of plant components are essential.
A properly designed cyclone must prevent the formation of powder accumulations inside the unit. Deposits can generate contamination during color change operations, slow down cleaning procedures, and reduce the amount of powder that can actually be recovered.
The filtration system must also guarantee:
- uniform airflow distribution
- low pressure losses
- effective cartridge cleaning
These elements help maintain consistent performance over time while reducing both energy consumption and maintenance operations.
What are the TAMA AERNOVA solutions for powder coating?
In powder coating booths, several solutions come into play to ensure efficiency, safety, and material recovery.
These include:
- V-AREN cyclone separator, designed to achieve high overspray separation performance
- MJT vertical cartridge filter, developed for industrial applications with high airflow rates
- ORV horizontal cartridge filter, a solution for high-efficiency extraction systems
Thanks to fluid dynamic studies conducted by the TAMA AERNOVA R&D department and the experience gained from numerous industrial installations, the V-AREN cyclone can achieve recovery rates of up to 96% of excess powder.
How can process efficiency and industrial competitiveness be improved?
In an industrial environment characterized by increasingly expensive energy and continuously rising raw material costs, improving the efficiency of coating systems becomes a strategic choice.
A properly designed powder coating dust collection system makes it possible to:
- reduce energy consumption
- recover a high percentage of powder
- improve process stability
- decrease overall operating costs
Investing in optimizing overspray management, therefore, means turning potential waste into a resource while improving both the plant's economic and environmental sustainability.
Discover TAMA AERNOVA solutions for powder coating overspray recovery
Learn more about the features of our cyclone separators and cartridge filters designed to improve the efficiency of powder coating systems.