Cartridge filter for powder coating
The cartridge dust collectors for powder coating designed and manufactured by Tama Aernova are dry filtration systems used to purify air from suspended solid particles. The filter inlet is designed to obtain an optimal fluid distribution. The recovered material is discharged into a special bin installed under the hopper. These filters are particularly suitable for the suction of dust deriving from polyester, epoxy or epoxy-polyester powder coating operations and which can form potentially explosive atmospheres (ATEX).
How it works
The dusty air is conveyed to the filtering cartridges passing from the outside to the inside, depositing the impurities on the external wall of the filtering elements and in the collecting hopper. A jet of compressed air, accumulated in a special tank, is injected cyclically into the cartridges, creating a violent wave of shaking able to detach and topple the particles deposited outside the cartridges.
Standard equipment for all powder coating collectors
- Filtration chamber
- Hopper with support legs
- Maintenance door
- Fan
- Soundproof box for fan
- Cleaning pneumatic system of the cartridges controlled by differential pressure switch
- Collection bin
Optional equipment for all powder coating collectors
- Manual shutter of calibration of payload
- Differential pressure switch ATEX for the recognition and monitor of the static pressure of the fan
- Second filtration stage with absolute filters
- Tank cover
- Control panel cover
- Pressure regulator
- Rotary valve for continuous dust discharge
- ATEX venting pannels
-
Cartridge Dust Collector Kompac Air MJT
The cartridge filter Kompac Air MJT is built and configured according to the type of use and according to the specific needs of the customer. Kompac Air MJT is equipped with the Multi Jet system which improves the cleaning of the cartridges and guarantees their durability over time. This cartridge filter has a high filtering surface. It is compact, easy to move and to transport and quick to install. [...]
-
Horizontal Cartridge Filter ORV
The ORV cartridge filter is particularly suitable for the suction of dust deriving from polyester, epoxy or epoxy-polyester powder coating operations and which can form potentially explosive atmospheres (ATEX). It is available in different sizes and is able to cover the most varied air flows within the required dimensional limits. ORV filter has a large filtering surface, is particularly compact, easy to handle and transport and quick to install. The down flow of the inlet air and the cartridges installed horizontally allow a better cleaning, a longer life of the filtering elements and a lower consumption of compressed air. [...]