AR Electrostatic Filter

The electrostatic filter AR is composed by modular units for the air filtration from pollution like oil mists, dusts, welding fumes and industrial smokes in general. Electrostatic filter AR have have a sturdy structure in bent sheet metal, suitable for the installation on the floor. The units are equipped with an inlet flange for the connection with the pipeline of the system. The filter is also equipped with an electric panel for the control of the electrostatic part and, for the model with the fan, also with the start/stop controls for the suction unit.

Strengths

A very important feature of AR filters is their modularity: the smallest module has a filtration capacity of about 2.000 m3/h and, combining opportunely the modules, we can obtain multiple air capacities, up to 48.000 m3/h. thanks to their modularity, electrostatic filter AR can be easily connected to different type of filter elements, for example pocket filters, drop separators, activated carbon filters.  

Operating principle

The AR electrostatic filter by Tama Aernova uses tungsten wires at 10 kV to charge particles in the air, which are then captured by aluminium plates at 5 kV. Pollutants like fumes, dusts, and oil mists are retained and must be periodically cleaned through simple maintenance.

Compact and modular, it can be equipped with a fan (AR M), activated carbon (AR CA), or both (AR CA M). Versions are available for dry fumes or oil mists, with a drainage and oil collection system. It handles particles from 10 to 0.01 microns, with a pressure drop of 40–80 Pa and supports inlet concentrations up to 50 mg/m³, temperatures up to 60°C, and humidity from 20% to 99%.

Standard equipment

Available options

GET IN TOUCH FOR THE BEST SOLUTION!

Enter your first and last name

The email on which you will be contacted

Phone number or cell phone

In this section you can write your message

I consent to the processing of my personal data. Read our Privacy Policy here