- label News
Discover how to reduce fine dust, combustion gases, acid fumes, and volatile organic compounds (VOCs) in ceramic production, thanks to industrial extraction and filtration systems fully compliant with BAT (Best Available Techniques).
In the ceramic industry, emission control is one of the most critical challenges for plant engineers, production managers, and environmental safety officers. Pollutants generated during different phases are not all the same: they vary in origin, composition, and associated risks. Among them, three categories stand out for frequency and impact: dust emissions, combustion gases, and chemical vapors. These are precisely the areas where industrial extraction systems can make a decisive difference. Extraction and filtration technologies must adapt to different emissions, whether dusty air or gaseous pollutants, depending on raw materials, production phases, and operating conditions.
In this article, we will discuss:
- How to reduce fine dust in ceramic production
- What ceramic kilns emit and how to capture combustion gases
- How to manage acid fumes and VOCs in technical ceramics
- Why industrial extraction is essential for BAT compliance
How to Reduce Fine Dust in Ceramic Production
Fine and ultrafine particulate is generated during crushing, pressing, and dry glazing. These dust emissions represent a serious health risk and reduce the long-term efficiency of industrial extraction systems.
The most effective strategy is to install localized extraction units at emission points, preventing dust from spreading in the working environment. Using baghouse filters designed to capture even the finest particles ensures safety, regulatory compliance, and consistent performance over time.
What Do Ceramic Kilns Emit and How to Capture Combustion Gases?
During firing in roller kilns, intermittent kilns, and tunnel kilns, emissions such as carbon monoxide (CO), carbon dioxide (CO₂), and sulfur oxides (SOx) are produced. If untreated, these combustion gases can corrode equipment, cause significant environmental impacts, and exceed the emission limits required by BAT guidelines.
In these cases, simple extraction is not enough. Plants require dedicated gas abatement systems, which act directly on the flue gases. Among the most effective solutions are lime dosing units and the injection of urea or ammonia, which neutralize pollutants before they are released into the atmosphere.
The treatment system must be sized according to kiln specifications and ensure optimal conditions of temperature and pressure, guaranteeing compliance with environmental regulations.
How to Manage Acid Fumes and VOCs in Technical Ceramics
In technical ceramics, the use of special additives, metallic pigments, and advanced glazes generates complex emissions such as acid fumes (HF, HCl) and volatile organic compounds (VOCs). These are mainly produced during glazing, drying, and high-temperature firing. If not properly managed, they can lead to regulatory exceedances and increased risks for both plants and operators.
Since these are toxic and corrosive substances, it is essential to use industrial extraction systems made with corrosion-resistant materials, capable of conveying fumes safely to specific treatment units.
An effective extraction system must combine:
- Localized capture in critical areas
- Chemical neutralization with reagents such as lime, bicarbonate, or urea/ammonia (when required by the process)
- Final filtration through the baghouse filter Pulco Air
All integrated into a BAT-compliant system, equipped with anti-corrosion ducts and certified components.
Why Industrial Extraction Is Essential for BAT Compliance
Emissions in the ceramic industry are strictly regulated by European standards, in particular Directive 2010/75/EU on Industrial Emissions (IED). This directive requires companies to implement Best Available Techniques (BAT) to prevent and minimize environmental pollution.
Without a correctly designed and dimensioned extraction and filtration system, it is impossible to remain within legal emission limits. On the other hand, a properly engineered plant makes it possible to:
- Improve safety and well-being in the workplace
- Extend the operational life of kilns and production equipment
- Reduce unplanned downtime and extraordinary maintenance
Want to Solve These Problems in Your Ceramic Plant?
Tama Aernova designs and manufactures customized industrial extraction and filtration systems for the ceramic industry, fully compliant with BAT requirements.
Our available technologies include:
- High-performance baghouse filter Pulco Air with automatic cleaning
- Materials with high chemical and thermal resistance
- Complete solutions for every stage: capture, filtration, neutralization
Contact us for a technical consultation: we will analyze the needs of your ceramic production plant and design a tailor-made solution.