Products

Cartridge Dust Collector

The cartridge dust collector Kompac Air by Tama Aernova is a dry filtration system used to purify air from suspended solid particles. 

Advantages 

The installation of the cartridge dust collector  Kompac Air allows treatment of a wide range of pollutants, by ensuring the quality of the air in the production environment and protection for workers. Filter elements cleaning is managed by pressure drop reading, favouring a lower compressed air consumption and an increased life for cartridges. The cartridge dust collector Kompac Air has a high filtering surface, it is compact, easy to handle and transport and quick to install. 

How it works

The dusty air is conveyed to the cartridges from the outside to the inside, depositing the impurities on the external part of the filter elements and in the collecting hopper. A compressed air jet, stored in a special tank, is injected cyclically in the cartridges, creating a wave of shaking able to detach and topple the particles deposited on the external part of the cartridges.

Standard equipment for all configurations

  • Filtration chamber
  • Hopper with support legs
  • Maintenance door
  • Cleaning pneumatic system of the cartridges controlled by differential pressure switch

Optional equipment for all configurations

  • Staircase and walkway to access the maintenance door
  • Tank cover
  • Control panel cover
  • Pressure regulator
  • Electrical panel

The cartridge dust collector Kompac Air is modular in its main parts directly by the costumer according to specific needs and type of use. The different configuration in the catalogue comes from the mix of the following variants:  

  • Type of inlet of dirty air (presence or not of pre-filtering chamber for the collection of the biggest dust, it has the task of protecting the cartridges from excessive load of pollutant)
  • Type of dust discharge (collection bin; rotary valve for continuous discharge; combined action of screw and rotary valve)
  • Means of access to the maintenance door and its placement
  • Possibility to use in ATEX area (presence or not of components suitable for potentially explosive mixtures)
  • Cartridge Dust Collector Kompac Air NSB

    Configuration with dirty air inlet directly into the hopper, frontal extraction system of the filtering elements, dust discharge in a special bin placed under the hopper.

    Optional equipment for the configuration

    • Deflector in hopper
    • Fan + soundproof box to lower the noise produce by the engine (on the top or on the ground)
  • Cartridge Dust Collector Kompac Air CSB

    Configuration with dirty air inlet consisting of a pre-filtration chamber, frontal extraction system of the filtering elements, dust discharge in a special bin located under the hopper. 

    Optional equipment for the configuration

    • Fan + soundproof box to lower the noise produce by the engine (on the top or on the ground)  
    • Hardox in inlet for abrasive powders
  • Cartridge Dust Collector Kompac Air NFB

    Configuration with dirty air inlet directly into the hopper, frontal extraction system of the filtering elements, dust discharge in a special bin placed under the hopper, soundproof box designed to house the fan installed on the roof. 

    Optional equipment for the configuration

    • Deflector in hopper
    • Fan
  • Cartridge Dust Collector Kompac Air CFB

    Configuration with dirty air inlet consisting of a pre-filtration chamber, frontal extraction system of the filtering elements, dust discharge in a special bin located under the hopper, soundproof box designed to house the fan installed on the roof. 

    Optional equipment of the configuration

    • Hardox in inlet for abrasive powders
    • Fan
  • Cartridge Dust Collector Kompac Air NSVA

    Configuration with dirty air entering directly into the hopper, frontal extraction system of the filtering elements, dust discharge through the action of the rotary valve, components suitable for the ATEX zone.

    Optional equipment of the configuration

    • Deflector in hopper 
    • Fire prevention system with tubes, sprayer nozzles and temperature probe 
    • Fan + soundproof box to lower the noise produce by the engine (on the top or on the ground)  
  • Cartridge Dust Collector Kompac Air CSVA

    Configuration with dirty air inlet consisting of a pre-filtration chamber, frontal extraction system of the filtering elements, dust discharge through the action of the rotary valve, components suitable for the ATEX zone.

    Optional equipment of the configuration

    • Fire prevention system with tubes, sprayer nozzles and temperature probe 
    • Hardox in inlet for abrasive powders
    • Fan + soundproof box to lower the noise produce by the engine (on the top or on the ground)  
  • Cartridge Dust Collector Kompac Air NFVA

    Configuration with dirty air entering directly into the hopper, frontal extraction system of the filtering elements, dust discharge through the action of the rotary valve, soundproof box suitable to house the fan installed on the roof, components suitable for the ATEX zone. 

    Optional equipment of the configuration

    • Deflector in hopper
    • Fire prevention system with tubes, sprayer nozzles and temperature probe 
    • Fan

  • Cartridge Dust Collector Kompac Air CFVA

    Configuration with dirty air inlet consisting of a pre-filtration chamber, frontal extraction of the filtering elements, dust extraction through the action of the rotary valve, soundproof box designed to house the fan installed on the roof, components suitable for the ATEX area. 

    Optional equipment of the configuration

    • Fire prevention system with tubes, sprayer nozzles and temperature probe 
    • Hardox in inlet for abrasive powders
    • Fan

  • Cartridge Dust Collector Kompac Air NSVX

    Configuration with dirty air entering directly into the hopper, frontal extraction system of the filtering elements, dust discharge through the action of the star valve, components suitable for the ATEX zone with explosion-proof panels installed on the roof.

    Optional equipment of the configuration

    • Deflector in hopper
    • Fire prevention system with tubes, sprayer nozzles and temperature probe 
    • Fan + soundproof box to lower the noise produce by the engine (on the top or on the ground)

  • Cartridge Dust Collector Kompac Air WLD

    Configuration with dirty air inlet consisting of a pre-filtration chamber, frontal extraction system of the filtering elements, dust discharge in a special bin under the hopper, cartridges suitable for filtering dust and fumes deriving from the process welding.

    Optional equipment of the configuration

    • Fan + soundproof box to lower the noise produce by the engine (on the top or on the ground)
    • Hardox in inlet for abrasive powders